Your gate or garage door is the largest moving part of your property.
Gippsland Gate Systems specialises in off-grid solar farm gates, sliding and swing gate automation, and methodical diagnostic fault-finding.
Featured Project
East Gippsland Heavy-Duty Gate Automation
Don't get stuck in the rain or struggle with heavy manual gates. We solve the most common gate problems daily:
Open and close your farm or driveway gate with the press of a remote or your smartphone without getting out of your vehicle.
Methodical diagnostics to pinpoint motor issues, control boards, faulty wiring, or adjustments without costly guesswork.
High-efficiency off-grid solar panels, deep-cycle batteries, and energy efficient Italian gate motors.
Supplying and coding genuine remote controls, vehicle induction loops, wireless keypads, and more.
Take a closer look at recent full-scale installations and diagnostic restorations delivered by Lucas across East Gippsland.
2026 Installation
Entrance upgrade reusing existing Solartronics system and widening the opening
Custom Fabrication
A tired G-force system was removed and replaced with this Centsys Vantage 400 system
Component Diagnostic
Rather than replacing the whole motor and gearbox assembly Lucas identified broken parts and replaced them on site. We stock many spare parts for many different brands.
From rural acreage solar gateways to high-frequency commercial entrances and residential driveway gates, every job is backed by precision engineering.
Purpose-built for Gippsland's rural properties, farm entrances, and acreage where running 240V mains power is impractical or cost-prohibitive. Complete with solar panels, smart chargers, and weather-proof battery cabinets.
Full automation packages for newly fabricated or existing driveway gates. We match the correct motor torque and duty cycle to your gate's weight, wind resistance, and daily usage requirements.
Repairs and replacements of existing garage door openers.
Protect your family, livestock, and vehicles with Australian standard safety devices. We install safety photoelectric beams, vehicle in-ground induction loops, digital keypads, and GSM access control (call to open).
Old-fashioned systematic testing. Instead of guessing and replacing parts until it works, Lucas tests circuits, capacitors, limit switches, and transformers to fix the exact point of failure.
Need replacement remote controls or receiver upgrades? We stock and source genuine transmitters, standalone receiver kits, hinges, guide rollers, and limit sensors for both new and discontinued systems.
Browse authentic photographs from our job archives across Gippsland, showing custom brackets, solar stands, wiring diagnostics, and gate automation.
Reliable off-grid solar automation engineered to maintain full battery reserve through extended overcast winter conditions.
An existing ATA sliding gate motor had failed and the customer agreed to replace with the Beninca Bull 624 for smooth and reliable operation
This 20 year old system was upgraded with new cantilever hardware and FAAC 746. The Ditec motor in the foreground was retired.
This 20 year old system was upgraded with new cantilever hardware and FAAC 746
This 20 year old system was upgraded with new cantilever hardware and FAAC 746
This home was completed before the fence was installed so running power to the gate was difficult without major demolition works.
Another view of the Beninca Bull 624 Turbo installed at a residential property.
The handsome timber gate was automated with Beninca TOM 5024E including out standalone solar system with no exposed wiring.
Sometimes the price of repairing a system is not worth it. ECA gave me a price for a single actuator that was very close to replacing the whole system. The quality of the Beninca system is chalk and cheese and the customer couldn't be happier.
This commercial customer was sick of getting out to open the gates especially with trucks blocking the roadway. A Beninca TOM system was fitted along with a Viro electric lock for added security
The Genius Mistral is a great system for small residential gates and can't be beaten for value for money.
As shown with our custom standalone power supply and solar stand there is no chance of your livestock chewing through cables.
This particular project had the solar power side of things installed by the owner who is an electrician. We supplied and installed the automation. Everyone is happy.
A neat little installation showing off the owners skills of landcaping and yet another Beninca TOM system
Another view of this nice installation.
Another Beninca single solar swing system where we also supplied and installed the off the shelf farm gate.
We worked with the customer to deliver a nice set of underground motors installed running on a custom hidden solar setup.
Beninca TOM telescopic motors are a great choice where there is limited sideroom but maximum power is needed.
Beninca TOM telescopic motors are a great choice where there is limited sideroom but maximum power is needed.
This customer did not want to excavate to run power to the gate so we have neatly ran a solar powered Beninca Bull 624 Turbo. These motors are smooth and fast.
This customer did not want to excavate to run power to the gate so we have neatly ran a solar powered Beninca Bull 624 Turbo. These motors are smooth and fast.
What was originally 2 mismatched farm gates, the customer wanted a single 16 foot gate which I installed along with a new post and tied back into the existing fence. Power was right there so it was a no brainer. Beninca TOM 5024E moves the 16 foot gate with ease.
Non reducing hinges were fitted to these existing gates and a Genius Mistral system was fitted for long term reliability.
The Sommer Twist 350+ is a fast gate system. This one was fitted with hidden photocells for aesthetics.
The Sommer Twist 350+ is a fast gate system.
This heritage property wanted to widen its entryway. 2 farm gates were removed (one was already automated). A 14 foot gate was installed with new posts and matching pickets were added to the infills. The existing Solartronics system was reused saving the customer money.
Existing sliding gate automated with a Beninca Bull 624 Turbo including safety devices and keypad entry.
The customer supplied this gate which I fitted and installed a Centsys D5 including keypad. The battery driven design means the gate will operate even during a power outage.
The customer was having nothing but problems with their existing G-Force swing gate system so I removed it and fitted this Centsys Vantage 400 system powered by the sun!
The customer was having nothing but problems with their existing G-Force swing gate system so I removed it and fitted this Centsys Vantage 400 system powered by the sun!
This gate originally had a FAAC hydraulic system but was damaged. I opted to change it to a FAAC 415 linear motor, new lock and photocells.
This gate originally had a FAAC hydraulic system but was damaged. I opted to change it to a FAAC 415 linear motor, new lock and photocells.
The customer supplied a Solartronics system. I installed it.
The uneven blocks made this installation a challenge, but I love a challenge. All powered by the sun.
The uneven blocks made this installation a challenge, but I love a challenge. All powered by the sun.
The uneven blocks made this installation a challenge, but I love a challenge. All powered by the sun.
Originally fitted with ATA SGO-1 motors, these gates got the royal treatment. The FAAC 415 are powerful and quite and will provide reliability for years to come.
Originally fitted with ATA SGO-1 motors, these gates got the royal treatment. The FAAC 415 are powerful and quite and will provide reliability for years to come.
I have the ability to weld anywhere which is very handy for rural situations.
This gate may have been here for many years but it can still be automated. Centsys Vantage powered by the sun.
This gate may have been here for many years but it can still be automated. Centsys Vantage powered by the sun.
Using steel end assemblies on your rural fence. We can automate those gates no problems with custom brackets fabricated on site.
Using steel end assemblies on your rural fence. We can automate those gates no problems with custom brackets fabricated on site.
This FAAC 746 was installed at a storage facility with keypad entry and safety devices.
Existing sliding gate automated with Centsys D5 and low voltage run back to the house.
The FAAC 844 is rated to a million open and close cycles and in my opinion is the best sliding gate motor ever made.
Is your farm gate hanging off a 100 year old tree stump? No problem, I can automate it. Centsys Vantage pictured with standalone solar system.
Although there is no local dealer anymore, these W-stay gates from Bosag are super strong and look cool. Solar Centsys Automation.
The FAAC 391 is great system for residential use. This system uses 2 sets of photocells for the ultimate in safety.
The Centsys D10 Smart is a sliding gate motor.
The original system here was never installed properly and gave the owner lots of headaches. I ripped it out and fitted the FAAC 391 system pictured. It is much more reliable and does not rely on limit switches like the original system.
This Beninca Bull 1224 Turbo was fitted to a small industrial complex. They are fast and smooth, a great choice for this application.
Another Centsys system on a steel end assembly.
Yes we do supply and repair boom gates too. This setup has keypad entry and exit. Free exit loop and safety devices all round.
Yes we do supply and repair boom gates too. This setup has keypad entry and exit. Free exit loop and safety devices all round.
All powered by the sun!
All powered by the sun!
Affordable and reliable, the Hermes is Made in Italy and built to last.
Need a gate system for your farm gate? We've got you covered.
Existing sliding gate automated with our custom built solar stand
Existing gates were rehung and Centsys automation added.
Nice little automation job with entry and exit buttons keeping livestock secure.
Nice little automation job with entry and exit buttons keeping livestock secure.
The customer built this sliding gate and I automated it with custom solar power supply and Centsys D5 automation.
Another farm gate automated using Centsys equipment
Another farm gate automated using Centsys equipment
I'm not sure what the original installer was thinking here but these gates did damage to the ATA motors that I have never witnessed before. High winds and salty environment killed them quickly. The FAAC 390 is an excellent choice for replacement and will last for many years to come.
I'm not sure what the original installer was thinking here but these gates did damage to the ATA motors that I have never witnessed before. High winds and salty environment killed them quickly. The FAAC 390 is an excellent choice for replacement and will last for many years to come.
I'm not sure what the original installer was thinking here but these gates did damage to the ATA motors that I have never witnessed before. High winds and salty environment killed them quickly. The FAAC 390 is an excellent choice for replacement and will last for many years to come.
I'm not sure what the original installer was thinking here but these gates did damage to the ATA motors that I have never witnessed before. High winds and salty environment killed them quickly. The FAAC 390 is an excellent choice for replacement and will last for many years to come.
I'm not sure what the original installer was thinking here but these gates did damage to the ATA motors that I have never witnessed before. High winds and salty environment killed them quickly. The FAAC 390 is an excellent choice for replacement and will last for many years to come.
Low voltage cabling was run from 30 metres away to power this Centsys system.
FAAC C720 installed on custom gate fabricated by us. These are a reliable and reasonably fast motor.
Centsys Vantage with our stand alone power supply and controller.
Centsys Vantage with our stand alone power supply and controller.
The solar supply and controller for this were installed further up the driveway for aesthetics.
The solar supply and controller for this were installed further up the driveway for aesthetics.
Yes we can automate your wooden gates.
Brick piers allowed a more traditional style installation here rather than our stand alone system.
Brick piers allowed a more traditional style installation here rather than our stand alone system.
Genius Mistral with stand alone power supply and controller.
Stagnoli Hermes on farm gates. A reliable choice.
Stagnoli Hermes Double Swing on farm gates with treated pine posts.
A Gippsland Gate Systems exclusive. When I designed these it really changed the way farm gates on treated pine posts are automated. Much neater and stronger than rebating the post with a chainsaw or similar.
A Gippsland Gate Systems exclusive. When I designed these it really changed the way farm gates on treated pine posts are automated. Much neater and stronger than rebating the post with a chainsaw or similar.
Custom installation for reliable operation for many years to come.
My petrol driven welder generator allows welding anywhere, anytime.
Due to the incline the gate swings out. Done properly this can be a reliable way to open and close your gate.
Ripped out a dodgy APC system that should never have been installed here. Fitted a FAAC 415 system with exit loop, internal safety loop, external photocells and keypad.
Customer supplied this system and I installed it. Please consider calling first before purchasing a gate system. In this case it would have been cheaper for me to supply and install the system, and better quality.
FAAC 391 system chosen because of brick piers. Great motors and a wise choice.
FAAC 391 system chosen because of brick piers. Great motors and a wise choice.
I used to build gates before I got very busy with automation. Here is a good example.
I used to build gates before I got very busy with automation. Here is a good example.
I used to build gates before I got very busy with automation. Here is a good example.
I used to build gates before I got very busy with automation. Here is a good example.
I used to build gates before I got very busy with automation. Here is a good example.
This custom access control was designed and manufactured for Eagle Point Primary School. We donated it along with a FAAC 950N door system as we are involved with Variety The Childrens Charity.
Stand alone solar power supply and controller.
Double Centsys Solar Setup
We manufacture these pushbutton stations where people are trying to keep animals and livestock in rather than for security.
Another Centsys Install
This solar panel was mounted low as per the customers request for aesthetics. As of 2026 the panel has only been broken once!
Showing the other side of the installation
Wireless keypads are a great choice for solar systems as they are self contained and don't draw power for the system itself.
No photos match the selected filter combination.
The automatic gate and door industry has evolved tremendously over the past 25 years. Too many technicians today rely on replacement guesswork—replacing expensive electronics and motors when a simple wire repair, capacitor change, or limit recalibration was all that was needed.
We use multi-meter testing, oscilloscopes, and systematic diagnostics to discover the exact root cause of intermittent failures, saving you hundreds in unnecessary parts.
Over decades of field installations, Lucas has compiled an unmatched library of technical service manuals, wiring diagrams, and dip-switch tables for both modern and vintage automation units.
Experienced in body corporate and commercial gate systems, ensuring gates work smoothly all year round.
We service, repair, and install systems from world leaders in door and gate automation:
Founder & Senior Systems Specialist
Industry Specialist Since 1998 • ABN: 47 691 949 669
My journey began in 1998 working for an Australian manufacturer of commercial door and gate operating equipment. Starting with in-house component assembly, board repairs, and warranty diagnostics, my focus quickly broadened to every technical discipline within the gate automation sector.
During the early 2000s, I transitioned into specialised independent contracting. Over the past 25+ years, I have seen automated gate designs advance from simple agricultural designs to high tech, high powered and extremely secure systems.
"I pride myself in old-fashioned repairs—actual systematic fault finding rather than guessing and throwing expensive replacement parts at a customer's gate hoping it will eventually work."
Whether you are an acreage owner needing a dependable solar gate that operates flawlessly every day of winter, or a strata manager looking for reliability, I treat every setup with uncompromising attention to detail.
1998
Manufacturing Origins
1,000+
Gates & Doors Serviced
100%
Gippsland Owned & Run
Trusted by homeowners, farmers, and commercial facilities across East Gippsland.
Helen D.
Rural Acreage, Wy Yung
Great working with Lucas. We're very happy with our new gate. He is very experienced with both the steelwork and automation. Lucas kept us in the loop during construction, turned up on time and took care not to disturb the lawn and garden. I definitely recommend Gippsland Gate Systems.
Maria D
Nicholson
Jill P
Ellaswood
We bring our mobile diagnostic and installation ute directly to your farm, business, or residence across:
Ready to upgrade to automatic push-button convenience, solve an urgent gate breakdown, or arrange a site consultation?
Direct Mobile
Lucas Wade
0413 148 208 (Tap to Call)Call direct for bookings and technical inquiries
Service Hours
Monday - Friday: 8:30 AM - 5:00 PM
Saturday by appointment / Emergency callouts
Emergency Gate Lock-in / Lock-out? Call Lucas directly on 0413 148 208.
Fill in your details below and Lucas will review your requirements and provide options tailored to your gate.